Technical data

470 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

25 :SBUS<n> Commands

:SBUS<n>:IIC:ASIZe

(see page 790)

Command Syntax

:SBUS<n>:IIC:ASIZe <size>

<size> ::= {BIT7 | BIT8}

The :SBUS<n>:IIC:ASIZe command determines whether the Read/Write bit

is included as the LSB in the display of the IIC address field of the

decode bus.

Query Syntax

:SBUS<n>:IIC:ASIZe?

The :SBUS<n>:IIC:ASIZe? query returns the current IIC address width

setting.

Return Format

<mode> ::= {BIT7 | BIT8}

Errors • "- 241, Hardware missing" on page 753

See Also • "Introduction to :SBUS<n> Commands" on page 447

• ":SBUS<n>:IIC Commands" on page 469