Technical data

:SBUS<n> Commands 25

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 459

:SBUS<n>:CAN:SAMPlepoint

(see page 790)

Command Syntax

:SBUS<n>:CAN:SAMPlepoint <value>

<value> ::= {60 | 62.5 | 68 | 70 | 75 | 80 | 87.5} in NR3 format

The :SBUS<n>:CAN:SAMPlepoint command sets the point during the bit

time where the bit level is sampled to determine whether the bit is

dominant or recessive. The sample point represents the percentage of time

between the beginning of the bit time to the end of the bit time.

Query Syntax

:SBUS<n>:CAN:SAMPlepoint?

The :SBUS<n>:CAN:SAMPlepoint? query returns the current CAN sample

point setting.

Return Format

<value> ::= {60 | 62.5 | 68 | 70 | 75 | 80 | 87.5} in NR3 format

See Also • "Introduction to :TRIGger Commands" on page 589

• ":SBUS<n>:MODE" on page 451

• ":SBUS<n>:CAN:TRIGger" on page 463