Technical data

456 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
25 :SBUS<n> Commands
:SBUS<n>:CAN:COUNt:RESet
(see page 790)
Command Syntax
:SBUS<n>:CAN:COUNt:RESet
Resets the frame counters.
Errors • "- 241, Hardware missing" on page 753
See Also • ":SBUS<n>:CAN:COUNt:ERRor" on page 454
• ":SBUS<n>:CAN:COUNt:OVERload" on page 455
• ":SBUS<n>:CAN:COUNt:TOTal" on page 457
• ":SBUS<n>:CAN:COUNt:UTILization" on page 458
• "Introduction to :SBUS<n> Commands" on page 447
• ":SBUS<n>:MODE" on page 451
• ":SBUS<n>:CAN Commands" on page 452