Technical data

444 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

24 :SAVE Commands

:SAVE:WMEMory:SOURce

(see page 790)

Command Syntax

:SAVE:WMEMory:SOURce <source>

<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}

<n> ::= 1 to (# analog channels) in NR1 format

<r> ::= {1 | 2}

The :SAVE:WMEMory:SOURce command selects the source to be saved as a

reference waveform file.

Query Syntax

:SAVE:WMEMory:SOURce?

The :SAVE:WMEMory:SOURce? query returns the source to be saved as a

reference waveform file.

Return Format

<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}

See Also • "Introduction to :SAVE Commands" on page 426

• ":SAVE:WMEMory[:STARt]" on page 445

• ":RECall:WMEMory<r>[:STARt]" on page 423

NOTE

Only ADD or SUBtract math operations can be saved as reference waveforms.

NOTE

MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or

MATH.