Technical data

:SAVE Commands 24

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 441

:SAVE:WAVeform:LENGth

(see page 790)

Command Syntax

:SAVE:WAVeform:LENGth <length>

<length> ::= 100 to max. length; an integer in NR1 format

When the :SAVE:WAVeform:LENGth:MAX setting is OFF, the

:SAVE:WAVeform:LENGth command sets the waveform data length (that is,

the number of points saved).

When the :SAVE:WAVeform:LENGth:MAX setting is ON, the

:SAVE:WAVeform:LENGth setting has no effect.

Query Syntax

:SAVE:WAVeform:LENGth?

The :SAVE:WAVeform:LENGth? query returns the current waveform data

length setting.

Return Format

<length> ::= 100 to max. length; an integer in NR1 format

See Also • "Introduction to :SAVE Commands" on page 426

• ":SAVE:WAVeform:LENGth:MAX" on page 442

• ":SAVE:WAVeform[:STARt]" on page 439

• ":WAVeform:POINts" on page 640

• ":SAVE:WAVeform:FORMat" on page 440