Technical data

434 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
24 :SAVE Commands
:SAVE:LISTer[:STARt]
(see page 790)
Command Syntax
:SAVE:LISTer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:LISTer[:STARt] command saves the Lister display data to a file.
See Also • "Introduction to :SAVE Commands" on page 426
• ":SAVE:FILename" on page 428
• Chapter 18, “:LISTer Commands,” starting on page 313
NOTE
If a file extension is provided as part of a specified <file_name>, it must be ".csv".