Technical data

:POD Commands 22
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 413
:POD<n>:SIZE
(see page 790)
Command Syntax
:POD<n>:SIZE <value>
<n> ::= An integer, 1, is attached as a suffix to the command and
defines the group of channels that are affected by the command.
POD1 ::= D0-D7
<value> ::= {SMALl | MEDium | LARGe}
The :POD<n>:SIZE command specifies the size of digital channels on the
display.
Query Syntax
:POD<n>:SIZE?
The :POD<n>:SIZE? query returns the digital channels size setting.
Return Format
<size_value><NL>
<size_value> ::= {SMAL | MED | LARG}
See Also • "Introduction to :POD<n> Commands" on page 411
• ":DIGital<d>:SIZE" on page 248
• ":DIGital<d>:POSition" on page 247
NOTE
This command is only valid for the MSO models.