Technical data

412 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

22 :POD Commands

:POD<n>:DISPlay

(see page 790)

Command Syntax

:POD<n>:DISPlay <display>

<display> ::= {{1 | ON} | {0 | OFF}}

<n> ::= An integer, 1, is attached as a suffix to the command and

defines the group of channels that are affected by the command.

POD1 ::= D0-D7

The :POD<n>:DISPlay command turns displaying of the specified group of

channels on or off.

Query Syntax

:POD<n>:DISPlay?

The :POD<n>:DISPlay? query returns the current display setting of the

specified group of channels.

Return Format

<display> ::= {0 | 1}

See Also • "Introduction to :POD<n> Commands" on page 411

• ":DIGital<d>:DISPlay" on page 245

• ":CHANnel<n>:DISPlay" on page 222

• ":VIEW" on page 182

• ":BLANk" on page 158

• ":STATus" on page 179

NOTE

This command is only valid for the MSO models.