Technical data

:HARDcopy Commands 17
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 309
:HARDcopy:PALette
(see page 790)
Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser
printers, so the COLor option is not available when connected to laser
printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also • "Introduction to :HARDcopy Commands" on page 296
• ":HARDcopy:STARt" on page 311
• ":HARDcopy:FACTors" on page 299
• ":HARDcopy:LAYout" on page 302
• ":HARDcopy:FFEed" on page 300
• ":HARDcopy:INKSaver" on page 301