Technical data

:FUNCtion Commands 16
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 287
:FUNCtion:GOFT:SOURce2
(see page 790)
Command Syntax
:FUNCtion:GOFT:SOURce2 <value>
<value> ::= CHANnel<n>
<n>::={1|2|3|4}for4chmodels
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce2 command selects the second input channel
for the g(t) source that can be used as the input to the FFT function.
Query Syntax
:FUNCtion:GOFT:SOURce2?
The :FUNCtion:GOFT:SOURce2? query returns the current selection for the
second input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n>::={1|2|3|4}for4chmodels
<n> ::= {1 | 2} for 2ch models
See Also • "Introduction to :FUNCtion Commands" on page 278
• ":FUNCtion:GOFT:SOURce1" on page 286
• ":FUNCtion:GOFT:OPERation" on page 285