Technical data

280 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:DISPlay
(see page 790)
Command Syntax
:FUNCtion:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion:DISPlay command turns the display of the function on or
off. When ON is selected, the function performs as specified using the
other FUNCtion commands. When OFF is selected, function is neither
calculated nor displayed.
Query Syntax
:FUNCtion:DISPlay?
The :FUNCtion:DISPlay? query returns whether the function display is on
or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also • "Introduction to :FUNCtion Commands" on page 278
• ":VIEW" on page 182
• ":BLANk" on page 158
• ":STATus" on page 179