Technical data

:DISPlay Commands 13

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 261

:DISPlay:PERSistence

(see page 790)

Command Syntax

:DISPlay:PERSistence <value>

<value> ::= {MINimum | INFinite | <time>}

<time> ::= seconds in in NR3 format from 100E-3 to 60E0

The :DISPlay:PERSistence command specifies the persistence setting:

• MINimum — indicates zero persistence.

• INFinite — indicates infinite persistence.

• <time> — for variable persistence, that is, you can specify how long

acquisitions remain on the screen.

Use the :DISPlay:CLEar command to erase points stored by persistence.

Query Syntax

:DISPlay:PERSistence?

The :DISPlay:PERSistence? query returns the specified persistence value.

Return Format

<value> ::= {MIN | INF | <time>}

See Also • "Introduction to :DISPlay Commands" on page 252

• ":DISPlay:CLEar" on page 257