User`s guide

Using N8480 Series Power Sensors 8
N1911A/1912A P-Series Power Meters User’s Guide 197
Option CFT, and require that you use default calibration tables or
manually enter the required correction factors. Likewise, they cannot be
used to make peak or time gated measurements.
The N8480 Series power sensors consist of four sensor model types with
respective power range:
• A- models (–35 dBm to +20 dBm)
• N8481A, N8482A, N8485A, N8487A, and N8488A
• B- models (–5 dBm to +44 dBm)
• N8481B and N8482B
• H- models (–15 dBm to +35 dBm)
• N8481H and N8482H
• Waveguide- models (–35 dBm to +20 dBm)
• N8486AQ and N8486AR
Please refer to the documentation supplied with your Agilent N8480 Series
power sensors for specification and calibration information.
1
The calibration factor table stored in the EEPROM is not applicable for N8480 Series sensors with
Option CFT.
2
Recommended for pulse signals measurement with period of more than one second.