Technical data

Repair Guide 6
N1911A/1912A P-Series Power Meters Service Guide 107
Step 13:
• Attach the front panel sub-frame to the
display support moulding, ensuring that all
plastic clips are engaged to hold it securely
Step 14:
• Connect the flex cable to the display
interface board, and then tighten the locking
tab
Step 15:
• Re-fit the calibrator plug
• This step is only applicable for calibrator
assembly with the calibrator plug.
• For more information on the improved
calibrator assembly, refer to “Improved
calibrator assembly” on page 78.
Instructions Visual