Technical data

15
The Agilent 8990A Peak Power
Analyzer pioneered the comprehensive
signal characterization of pulsed
microwave signals approximately in
1990. It has become obsolete some
years ago. When you combine the
N1918A Power Analysis Manager
with a P-Series power meter, including
its peak and average sensors, the
complete 15 pulse parameters’
real-time and computed data are
immediately shown on the screen.
In addition, it can perform these
computations for more than one
power channel at a time, which is an
important capability.
Figure 18 The Power Analyzer screen displays the 15 measured and
computed parameters that characterize the RF/microwave
pulse power completely when pulsed data is captured
on the P-Series power meters.
Figure 19 The overlay trace function provides the computed delta
trace, which shows the differences between pulsed data
of Measurement Devices 1 and 2.
Providing Comprehensive Pulsed Signal Characterization with all Pulse Parameters