Technical data

PSTatistic Subsystem 9

N1911A/1912A P-Series Power Meters Programming Guide 355

PSTatistic[1]|2:CCDF:TRACe:POWer:PTAVerage?

This command is used to retrieve peak to average power value of Channel

A or Channel B trace.

Syntax

Example

Error Messages

• If no power sensor is connected, error –241 "Hardware missing" occurs.

• If sensor/sensors connected are not P- Series sensors, error –241

"Hardware missing" occurs.

• If measurement speed setting is FAST, error –221 "Settings conflict"

occurs.

• If command is executed in other window besides CCDF window, error

–221 "Settings conflict: Requires CCDF window" occurs.

NOTE

This command is only applicable when P-Series sensors are present and the following

conditions are met:

• Free-run acquisition mode is selected

• NORMal or DOUBle measurement speed setting is chosen

:POW

PST

:CCDF :TRAC

:PTAV

PST:CCDF:TRAC:POW:PTAV? This command returns the peak to

average power value of Channel A trace.