Specifications

Get Instant Insights into your Design with Multiple Views and Analysis Tools

Acquisition and analysis tools

provide rapid insight into your

toughest debug problems

You have unique measurement

and analysis needs. When you

want to understand what your

target is doing and why, you need

acquisition and analysis tools

that rapidly consolidate data into

displays that provide insight into

your system’s behavior.

Optional analysis and automated measurement packages

B4655A FPGA dynamic probe Gain unprecedented visibility into your FPGA’s internal activity. Make incremental real-time

measurements in seconds without stopping the FPGA, changing the design or modifying design

timing. Quickly set up the logic analyzer with automatic pin mapping and signal bus naming by

leveraging work you did in your design environment. www.agilent.com/find/fpga

89601A-300 digital vector signal analysis, Perform time-domain, spectrum, and modulation quality analysis on digital Baseband and

hardware connectivity for logic analyzers IF signals. www.agilent.com/find/dvsa

B4601C serial-to-parallel analysis package Eliminate the tedious, time-consuming, and error-prone task of sifting through thousands of

analysis package serial bits by looking at long vertical columns of captured 1’s and 0’s. The

B4601C serial-to-parallel analysis package is general-purpose software that allows easy

viewing and analysis of serial data.

B4606A advanced customization Tailor your logic analyzer interface with a wide range of control, analysis and display

environment – development and capabilities specific to your measurement application. Create integrated dialogs, graphical

runtime package displays and analysis functions to quickly manipulate measurement data into a format that

provides additional insight and answers. www.agilent.com/find/logic-customview

B4607A advanced customization Run the macros and graphical views created with a B4606A development package or obtain

environment – runtime package and run a variety of commonly requested tools from Agilent and it's partners to help customize

your measurement environment.

B4608A ASCII remote programming Remotely control a 16900-, 16800-, 1680-, or 1690-Series logic analysis system by issuing

interface ASCII commands. This interface is designed to be as similar as possible to the RPI on the

16700 Series logic analysis system, so that you can reuse existing programs. Requires either

B4606A or B4607A to be enabled. You can also use the B4606A to customize and add RPI

commands.

B4610A data import package Use the logic analyzer GUI to view data obtained from tools other than a logic analyzer.

B4630A MATLAB

connectivity and Make an easy connection to MATLAB and transfer your logic analyzer measurement data for

analysis package processing. Display the results on the logic analyzer in an XY scattergram chart.

Figure 5. Perform in-depth time, frequency and modulation

domain analysis on your digital baseband and IF signals

with Agilent’s 89600 Vector Signal Analysis software.