Technical data

Solving Problems 4
16800 Series Portable Logic Analyzers Installation/Quick Start Guide 55
• the version of the Logic Analyzer software which was installed when
the system was originally shipped and not the latest or upgraded
version of the software that might be available at the time of system
recovery.
• the license files of any licensed optional products that you had
purchased with the Logic Analyzer and that were installed when the
system was originally shipped.
To run the recovery process
1 Shut down and then restart your Logic Analyzer.
While booting up, the Logic Analyzer displays the Windows Boot
Manager screen. This screen provides you the following options:
• Microsoft Windows 7 - This is the default selected option. This
option starts the Logic Analyzer with the Windows 7 operating
system. This is the normal startup of the system.
• Agilent Recovery system - You should select this option when you
want to restore/repair your Logic Analyzer software by running the
Agilent recovery process.
NOTE
When you run the recovery process, the software licensing Host ID of your logic analyzer
may change. If this happens, the restored license files will not work with the new host ID
and you will need rehosted license files. To get these files, you can contact your nearest
Agilent sales/service office. To locate a sales or service office, go to
www.agilent.com/find/contactus.
CAUTION
Running the recovery process reformats your logic analyzer’s hard disk drive to the
state in which it was originally shipped to you. All user data files and programs are
overwritten when the recovery process runs. Therefore, save your data to a CD or to
another machine before you start recovering the system software.