Technical data

4 Solving Problems
52 16800 Series Portable Logic Analyzers Installation/Quick Start Guide
On newer/current 16800 series logic analyzers:
1 From the Windows Start menu, choose Start>All Programs>Agilent
Logic Analyzer>Utilities>Touch Screen>Calibration and Settings.
2 In the Microchip TSHARC Control Panel dialog, select the Calibration
tab.
3 By default, the number of points is set to 4 and the Inset is set at
20.0%.
4 Click Begin Calibration.
5 If you want to enable the right- click functionality on the touch screen,
select the Click Settings tab and then select the Enable Right- Click
checkbox. You can also set the area on the touch screen on which you
want to enable the right- click functionality.