Technical data

16800 Series Portable Logic Analyzers Installation/Quick Start Guide 5
• Logic Level (data pods): 5 V TTL, 3- state TTL, 3- state
TTL/CMOS, 3- state 1.8 V, 3- state 2.5 V, 3- state 3.3 V,
ECL, 5V PECL, 3.3V LVPECL, and LVDS.
• Data Inputs: 3- bit pattern level sensing (clock pod).
• Clock Output: Synchronized to output data, delay of 7 ns
in 14 steps (clock pod).
• Clock Input: DC to 300 MHz (clock pod).
• Internal Clock Period: Programmable from 1 MHz to
300 MHz in 1 MHz steps.
• External Clock Period: DC to 300 MHz.
• External Clock Duty Cycle: 1.3 ns minimum high time.
Supplied Accessories
•PS2 mouse.
•PS2 keyboard.
•Accessory pouch and power cord.
Snap the accessories pouch to the top of the 16800 Series
logic analyzer. Use it to store probe leads, accessories, or
manuals. Use the tie- down straps under the flap to
conveniently hold pod cables not in use or during
transport.
Optional Accessories
•Probes.
Front Panel
Refer to the online help in the logic analyzer for information
on using the analyzer.
Rear Panel
Before you turn on the system, connect your mouse and
keyboard to the 16800 Series logic analyzer rear panel. If a
touch screen (Option 103) is not included, a connected
mouse and keyboard are required for normal system use.