Technical data

Updating the Logic Analyzer 3
16800 Series Portable Logic Analyzers Installation/Quick Start Guide 43
If your 16800 Logic Analyzer has 5.20 or later version of Logic Analyzer
software and Windows 7 installation, then restore the firewall defaults by
performing the following steps:
1 From the Windows Start menu, choose Start>Control Panel.
2 Click the Windows Firewall link.
3 Click Restore defaults in the left pane of the window.
4 Again click Restore defaults.
5 Uninstall and then reinstall the Logic Analyzer software from
www.agilent.com/find/la- sw- download.
The logic analyzer firewall defaults enable the following exceptions:
• Agilent Logic Analysis Application program.
• Agilent Logic Analysis Service program.
• File and Printer Sharing.
• Microsoft RPC Endport Mapper TCP port.
• Remote Desktop service.
• Web Server (HTTP) port.
The logic analyzer firewall defaults also enable the following ICMP
(Internet Control Message Protocol) settings:
• Allow incoming echo request.
• Allow outgoing destination unreachable.
• Allow outgoing time exceeded.
NOTE
Note that there are separate Windows Firewall profiles: Domain for when the computer has
domain membership, and Standard for when the computer has workgroup membership.
When you restore the logic analyzer firewall defaults, the defaults for both profiles are
restored.