Technical data

2 Getting Started with the Logic Analyzer
30 16800 Series Portable Logic Analyzers Installation/Quick Start Guide
To power off the system
You can power off the logic analyzer using Windows Shutdown or a short
press of the power button.
Using the Windows Shutdown
On the logic analyzer desktop click Start>Shut Down or if you are
running remote desktop, click Start>Windows Security>Shut Down. This:
• Closes all programs that are running.
• Writes all data to the disk.
• Turns off the power supply.
• If the system is unplugged while it is off and then plugged back in, the
system will not power on until the power button is pressed.
Using a Short Press of the Power Button
Pressing the power button on the logic analyzer for a short time (less than
2 seconds):
• Closes all programs that are running.
• Writes all data to the disk.
• Turns off the power supply.
If the power button on the Remote Desktop is depressed for a short time
(less than 2 seconds or so), a message on the logic analyzer screen (not
on the remote desktop) will pop up asking if you really want to power
down. Clicking the 'yes' button results in the above events. Clicking 'no'
will prevent the shutdown. Not answering the dialog box (clicking neither
"Yes" nor "No") will have no effect. Further short presses on the power
button will have no effect.
NOTE
When powering off the logic analyzer, wait until the fans stop turning (about 15 seconds)
before turning the logic analyzer back on. This ensures that internal circuitry restarts in a
known state.