Specifications

23
Get Instant Insights into your Design with Multiple Views and Analysis Tools
Acquisition and analysis tools
provide rapid insight into your
toughest debug problems
You have unique measurement and
analysis needs. When you want to
understand what your target is doing
and why, you need acquisition and
analysis tools that rapidly consolidate
data into displays that provide insight
into your system’s behavior.
Optional analysis and automated measurement packages
B4655A FPGA dynamic probe Gain unprecedented visibility into your FPGA’s internal activity. Make incremental
real-time measurements in seconds without stopping the FPGA, changing the design or
modifying design timing. Quickly set up the logic analyzer with automatic pin mapping
and signal bus naming by leveraging work you did in your design environment.
www.agilent.com/find/fpga
89601A-300 digital vector signal analysis,
hardware connectivity for logic analyzers
Perform time-domain, spectrum, and modulation quality analysis on digital Baseband
and IF signals.
www.agilent.com/find/dvsa
B4601C serial-to-parallel analysis package Eliminate the tedious, time-consuming, and error-prone task of sifting through
thousands of analysis package serial bits by looking at long vertical columns of captured
1’s and 0’s. The B4601C serial-to-parallel analysis package is general-purpose software
that allows easy viewing and analysis of serial data.
B4606A advanced customization
environment—development and runtime
package
Tailor your logic analyzer interface with a wide range of control, analysis and display
capabilities specific to your measurement application. Create integrated dialogs,
graphical displays and analysis functions to quickly manipulate measurement data into
a format that provides additional insight and answers.
www.agilent.com/find/logic-customview
B4607A advanced customization
environment—runtime package
Run the macros and graphical views created with a B4606A development package or
obtain and run a variety of commonly requested tools from Agilent and it's partners to
help customize your measurement environment.
B4608A ASCII remote programming
interface
Remotely control a 16900-, 16800-, 1680-, or 1690-Series logic analysis system by
issuing ASCII commands. This interface is designed to be as similar as possible to the
RPI on the 16700 Series logic analysis system, so that you can reuse existing programs.
Requires either B4606A or B4607A to be enabled. You can also use the B4606A to
customize and add RPI commands.
B4610A data import package Use the logic analyzer GUI to view data obtained from tools other than a logic analyzer.
B4630A MATLAB
®
connectivity and
analysis package
Make an easy connection to MATLAB and transfer your logic analyzer measurement
data for processing. Display the results on the logic analyzer in an XY scattergram chart.
Figure 5. Perform in-depth time, frequency and modulation domain analysis on your
digital baseband and IF signals with Agilent’s 89600 Vector Signal Analysis software.