Specifications

95
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
Using Both Analyzers
2. Assign the bits that map to the input probe signals.
The Trigger Tab
1. From the Trigger Function tab, select Find anystate n times.
2. Select Replace.
This will cause the State analyzer to trigger and begin running as soon as
the arming signal is received from the Timing analyzer.
Configure the Arming Tree
How you configure the Arming Tree determines which analyzer sends
the arm signal to the other. By default both analyzers are armed by the
Run field.
1. From the Settings tab, select Arming Control.
2. From the Arming Tree dialog that appears, set Analyzer N to be armed
from Run, and Analyzer N2 to be armed from Analyzer N as shown below.