Specifications

85
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
Using a Timing Analyzer and an Oscilloscope
When the oscilloscope triggers on the glitch, the arm signal is sent to
the next instrument tool.
NOTE: Remember, the arm signal does not automatically start the next instrument
tool. The arm signal simply tells the next instrument that it can start
evaluating its own trigger specification and run when trigger conditions are
satisfied.
Configure the Logic Analyzer
The Sampling Tab
1. Select the Sampling tab and set the analyzer to Timing Mode.
2. Set the Timing Mode Controls as shown below.