Specifications

56
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
File Management Tools
Connections list, then select Unmount. This will not affect the files on the
drive. They will just not be accessible until the drive is mounted again.
File Types
When saving tool configurations, one or more files will be created in the
destination file system. For example:
test_setup.__A 16556A_LA_Config
test_setup.___ System Config
A file for each instrument tool involved in the Save process will be
created. An additional file may be created to store additional system
information.
• The same file name prefix is used for all of the files. (The name you
specified)
• The file suffix indicates the card slot of the instrument whose parameters
were saved, or 3 underscores for system information.
• The file type indicates the type of data contained in the file.
See Also • “What Gets Loaded” on page 47
• “Other File Types” on page 56
Other File Types
• .x - Typically an OMF or executable file. These files are used by the symbol
utility.
• .ns - Output of the symbol utility when linked to a label. These files are
used by the symbol utility.
• .pcx - Formatted bit map file.
• .tif - Tagged Image File Format.
• .eps - Extended Postscript file.
• .txt - Output of the File Out tool. This is an ASCII data file.