Specifications

47
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
File Management Tools
“File Types” on page 56
What Gets Loaded
When loading a configuration file, the target determines which of the
files will be loaded into actual instruments. You only need to highlight
one of the files created in a given Save, and the system software will
load the correct data.
For example, given these files:
test_setup.__A 16556A_LA_Config
test_setup.___ System_Config
If the 16556A_LA_Config file is highlighted AND:
• All is selected as the target, the information in the System_Config file is
also loaded. Also, the Config Only option is unavailable (as if you had
highlighted the System_Config file in the first place).
• A specific analyzer is selected as the target, only the analyzer data is
loaded (without the related system configuration information).
To save configuration files
Save a configuration file by selecting File->Save Configuration in a
tool window, or by selecting the Save tab in the File Manager.
1. From the File Manager window, in the Directories: frame, build a path to
the directory where you want to save the config file.
2. Type the name of the new config file, or select an existing file in the
Contents: frame for overwriting.
3. Select:
• Config and Data - saves settings and the current contents of
acquisition memory. This option results in larger configuration files
(whose size relates to the amount of acquisition memory).
• Config Only - saves only the current tool settings. This option results
in smaller configuration files, but after reloading the configuration file,
you must rerun the measurement to acquire data.