Specifications

180
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
Using the Analysis Tab
Using the Analysis Tab
The logic analysis system allows you to use a variety of tools to filter,
compare, and display the measurement data. Depending on where in
the configuration you place these tools, you can generate multiple
views of only the data you are interested in seeing.
The Analysis tab is used to insert tools into your configuration from
the current display.
NOTE: Using the Analysis tab to insert tools is a convenient way to expand a basic
configuration. However, if your measurement requires a more complex
reconfiguration, the system will notify you to perform the reconfiguration
from the Workspace window.
1. From the current display window, select the Analysis tab.
2. Highlight the desired tool to create within the configuration.
3. Select Create. If desired, you can verify the placement of the new tool
from the Workspace window.