Specifications

148
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
The System Administration Tools
6. Change Startup Type to Automatic.
7. Configure your printers on the NT machine as you normally would.
From the System Administration Tools Window:
NOTE: Do not put white space in the printer name.
1. From the Admin tab in the System Administration Tools window, select
Printers ....
2. Select Network.
3. Type in the recognized Printer name. See the note below.
4. Type in the recognized Print Server hostname. In addition to being listed
in a network host table, the print server network name must be resolvable
in the logic analysis system.
5. Select Yes to Berkeley UNIX server.
6. In the Printer type pulldown, select the printer type you are connecting.
7. Select OK.
NOTE: Consult your system administrator for the required printer name and print
server name. These names should be located in the network's host table or
name server. The print server network name must also be resolvable in the
logic analysis system.