Specifications

147
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
The System Administration Tools
2. From the Printer Setup dialog that appears, select Network.
3. Type in the recognized Printer name. See the note below.
4. Type in the recognized Print Server name. In addition to being listed in a
network host table, the print server network name must be resolvable in
the logic analysis system.
5. In the Printer type pulldown, select the printer type you are connecting.
6. Select OK.
NOTE: Consult your system administrator for the required printer name and print
server name. These names should be located in the network's host table or
name server. The print server network name must also be resolvable in the
logic analysis system.
Windows NT Server Configuration
From the Windows Interface:
1. From the Main file group, select Control Panel, then Network.
2. Select the Services tab.
3. Select Add..., select TCP/IP Printing, then select OK. At this point, NT
will automatically install the Berkeley Unix LPD print server.
4. From the Control Panel, select Services.
5. From the Services control panel, select TCP/IP Print Server, then select
Startup....