Specifications

130
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
The System Administration Tools
NOTE: For security reasons, password information is not saved when the Previous
dialog is used. If password information was previously entered, it must be re-
entered.
See Also “To map a Windows network drive” on page 127
“To disconnect a currently mapped drive” on page 130
To disconnect a currently mapped drive
1. Terminate all file operations and interactions with the mapped Windows
network drive.
CAUTION: If you Disconnect a share mapping when either a file is still open, or a file
operation is in progress, the resulting file contention may cause long delays or
an unstable system.
2. In the Networking tab of the System Administration Tools dialog, select
Map Windows Network Drive....
In the Map Windows Drive dialog, the Current Connections list shows
currently mapped drives.
3. Select the desired connection in the Current Connections list.
4. Select Disconnect.
See Also “To map a Windows network drive” on page 127
“To re-map a previously mapped drive” on page 129
To find a Windows computer's netbios name
On Windows 95/98/Me/NT computers:
1. Right-click on Network Neighborhood under the Windows system.
2. Select Properties from the menu.
3. Locate the tab labeled Identification.
The Computer Name is specified there.