Specifications

126
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
The System Administration Tools
help volume)
• Setting Up an E5901B Emulation Module (see the Emulation: Setting Up
help volume)
An easy way to configure an emulation probe is to use the Setup
Assistant. Use the Setup Assistant if:
• You have a single E5900B emulation probe interconnected to an E5901B
emulation module, or
• You have an emulation probe and NO emulation module is installed in your
logic analysis system.
The Setup Assistant will not allow you to set up a standalone emulation
probe if an emulation module is installed.
See Also • Using an E5901A Emulation Module on Your LAN (see the Emulation:
Setting Up help volume)
• To obtain LAN information (see the Emulation: Setting Up help volume)
• The Setup Assistant (see the Setup Assistant help volume)
Mapping Windows Network Drives
The Map Windows Drive dialog is used to connect to a Windows
network shared drive so that you can access and perform file
operations on the drive with the logic analysis system.
Once a Windows network drive has been mapped, you can re-map the
drive using previously entered information.
• “To map a Windows network drive” on page 127
• “To re-map a previously mapped drive” on page 129
• “To disconnect a currently mapped drive” on page 130
• “To find a Windows computer's netbios name” on page 130
• “To find a Windows computer's share names” on page 131