Specifications

121
Chapter 1: Agilent Technologies 16700A/B-Series Logic Analysis System
The System Administration Tools
9. Select OK.
NOTE: To start the network setup from the factory default settings, select Default
Network before performing the steps above.
See Also “To resolve names using a name server” on page 121
“To resolve names using a host table” on page 122
“To resolve Windows names” on page 123
To resolve names using a name server. When the logic analysis
system communicates with other computers on the network, it must be
able to get the internet (IP) addresses associated with the names of
those computers. It can get internet addresses either from a host table
or a Domain Name System (DNS) name server.
To set up for name resolution using a name server:
1. From the Network Setup dialog, select Name Resolver....
2. In the Name Resolution Dialog, select the Name Server option.
3. Enter the name by which the domain is known to the network. For
example, for the fully qualified hostname my16700b.cos.agilent.com, the
domain name is cos.agilent.com.
4. Enter the internet (IP) addresses of up to three name servers. Only one
name server IP address is necessary; additional name server addresses are
used if previous name servers are not available.
5. Select OK.