Installation guide
Table Of Contents
- A Quick Tour
- Before You Begin
- Introduction to Timing Analysis: Trigger on an Edge
- Verify Pulse Widths
- Introduction to State Analysis: Trigger on an Event
- Trigger on a Sequence of Events
- Trigger on a 4 Bit Serial Pattern
- Trigger the Oscilloscope with the Timing Analyzer
- Load the RESET Configuration File
- Connect the Oscilloscope Probe and Turn the Glitch On
- Get the Analog Waveform on the Display
- Set Up the Timing Analyzer
- Set Up the Timing Analyzer to Trigger on the Glitch
- Tell the Oscilloscope When to Trigger
- Set Up the Analyzer to Arm the Oscilloscope
- Run the Timing Analyzer and Oscilloscope
- Add the Analog Waveform to the Timing Waveform
- Turn the Glitch Off
- Save Your Work
- Lesson Summary
- Using the Pattern Generator
- Load the RESET Configuration File
- Connect the Pattern Generator
- Set Up the Timing Analyzer
- Set Up the Bus Labels
- Define the Trigger Conditions: Trigger on a 1
- Set Up the Pattern Generator
- Program the Pattern Generator Output
- Start the Pattern Generator and View the Walking Ones Pattern
- Stop the Pattern Generator
- Save Your Work
- Lesson Summary
- Setting the Jumpers
- About the Credit Card Board
8
Contents
5 Introduction to State Analysis:
Trigger on an Event
Introduction to State Analysis: Trigger on an Event 58
Load the RESET Configuration File 60
Set Up the State Analyzer 61
Set Up the Bus Labels 62
Define the Trigger Conditions: Trigger on an Event 64
Run the Analyzer and View the Listing 67
Save Your Work 69
Lesson Summary 70
6 Trigger on a Sequence of Events
Trigger on a Sequence of Events 72
Load the RESET Configuration File 74
Set Up the State Analyzer 75
Set Up the Bus Labels 76
Trigger on a Sequence of Events 78
Run the State Analyzer and View the Listing 82
Save Your Work 83
Lesson Summary 84
7 Trigger on a 4 Bit Serial Pattern
Trigger on a 4 Bit Serial Pattern 86
Load the RESET Configuration File 88
Set Up the State Analyzer 89
Set Up the Bus Labels 91
Define the Trigger Conditions: Trigger on a
4-bit Serial Pattern 92
Run the Analyzer and View the Listing 94
Save Your Work 95
Lesson Summary 96