Installation guide
Table Of Contents
- A Quick Tour
- Before You Begin
- Introduction to Timing Analysis: Trigger on an Edge
- Verify Pulse Widths
- Introduction to State Analysis: Trigger on an Event
- Trigger on a Sequence of Events
- Trigger on a 4 Bit Serial Pattern
- Trigger the Oscilloscope with the Timing Analyzer
- Load the RESET Configuration File
- Connect the Oscilloscope Probe and Turn the Glitch On
- Get the Analog Waveform on the Display
- Set Up the Timing Analyzer
- Set Up the Timing Analyzer to Trigger on the Glitch
- Tell the Oscilloscope When to Trigger
- Set Up the Analyzer to Arm the Oscilloscope
- Run the Timing Analyzer and Oscilloscope
- Add the Analog Waveform to the Timing Waveform
- Turn the Glitch Off
- Save Your Work
- Lesson Summary
- Using the Pattern Generator
- Load the RESET Configuration File
- Connect the Pattern Generator
- Set Up the Timing Analyzer
- Set Up the Bus Labels
- Define the Trigger Conditions: Trigger on a 1
- Set Up the Pattern Generator
- Program the Pattern Generator Output
- Start the Pattern Generator and View the Walking Ones Pattern
- Stop the Pattern Generator
- Save Your Work
- Lesson Summary
- Setting the Jumpers
- About the Credit Card Board
109
Chapter 8: Trigger the Oscilloscope with the Timing Analyzer
Set Up the Analyzer to Arm the Oscilloscope
Set Up the Analyzer to Arm the Oscilloscope
Now that the timing analyzer is set to trigger on the glitch, and the
oscilloscope is set to trigger after the timing analyzer, it is time to
coordinate the run function of both instruments. This coordination is
called “arming”, and it is set up in the Intermodule window. The
Intermodule window shows a graphical representation of the internal
arming sequence between instruments.
In this exercise, the oscilloscope is ‘armed by’ the timing analyzer. This
means that for the oscilloscope to trigger, the timing analyzer must
trigger first.
1 Go back to the Main System window.
2 Click on the Inter-Module icon in the tool box.
3 Hold the mouse over the icons and read the pop-up descriptions.