Installation guide

Setting Up Multiframe Configurations 5
16900 Series Logic Analysis Systems Installation Guide 95
If the application starts without errors, and the multiframe system
appears in the Overview window, you are almost ready to use the
multiframe system.
Exit the application, and continue on step 10.
9 If you are not able to see the multiframe system in the Overview
window on the frame, do the following:
a Exit the Agilent Logic Analyzer application.
b Power down all frames.
c Disconnect and reconnect the multiframe cables between all frames.
d Power up all frames.
e Log into one of the frames, and start the Agilent Logic Analyzer
application again. If it starts properly, then exit the application.