Installation guide

90 16900 Series Logic Analysis Systems Installation Guide
5 Setting Up Multiframe Configurations
• Run the Agilent Logic Analyzer application on your remote PC and
connect to the multiframe system by going online and connecting to the
frame. With this option:
• Your performance may vary because analyzer data from all logic
analysis frames must be sent over LAN to your locally running
application.
Simple 2-Frame w/Crossover Cable Configuration
When you have only two frames in the simple 100 Base- T multiframe
configuration (see page 85), you can gain performance by connecting a
crossover cable between the frames’ 1000 Base- T ports and configuring
these ports with static IP addresses.
If you have a 1000 Base- T switch, use the simple 1000 Base- T multiframe
configuration instead (see page 86).
Interface to Corporate LAN
100 Base-T Switch
Multiframe Cable
Cross-over Cable Between
1000 Base-T Interfaces
16901A/902A/902B (must be at least 1)
16900A/901A/902A/902B