Installation guide

88 16900 Series Logic Analysis Systems Installation Guide
5 Setting Up Multiframe Configurations
4 Power up all frames.
As the operating system loads, it will:
• Configure the connection to the corporate LAN.
• Start various services.
• Start the logic analyzer service.
5 Log in to the frame you chose to run the Agilent Logic Analyzer
application on, and wait for the application to start.
If the application starts without errors, and you see the multiframe
system in the Overview window, you are ready to use the multiframe
system.
NOTE
Depending on your multiframe connection topology, it may take several seconds for the
Agilent Logic Analyzer application to start.