Installation guide

28 16900 Series Logic Analysis Systems Installation Guide
2 Installing Logic Analyzer Cards and Probes
5 Seat the modules then rotate the ejector tabs to the locked position.
Repeat for all modules or filler panels.
6 Tighten the thumb screws until finger tight in the same order used in
step 5 above.
7 For correct air circulation, install filler panels in all unused card slots.
Correct air circulation keeps the instrument from overheating. Keep any
extra filler panels for future use.
Insertion Order
Removal Order
6
5
4
3
2
1
1
2
3
4
5
6
Ejecting Order
Locking Order
6
5
4
3
2
1
1
2
3
4
5
6