Installation guide

Setting Up Hardware 1
16900 Series Logic Analysis Systems Installation Guide 17
To connect to a LAN
Local area networks (LAN) are enabled outside of the logic analyzer
application using the Windows network configuration wizard.
1 Connect the LAN cable(s) to the back of your logic analysis system.
• Agilent recommends using a 1 Gbit LAN card when networking
multiple frames.
The 16902B and 16901A frames have an integrated 1 Gbit LAN
interface.
For information on installing a 1 Gbit LAN card in your system, See
“To install interface cards (16900A, 16902A, 16902B, or 16903A)” on
page 113.
• For information on network configurations when connecting multiple
frames see Chapter 5, “Setting Up Multiframe Configurations on
page 83.
2 Refer to “First- Time Set Up” on page 77 to answer the Windows
Welcome when you power up the logic analyzer.
NOTE
Microsoft recommends the following three steps to ensure the instrument's PC is
protected:
a Use an internet firewall.
b Get computer updates.
c Use up-to-date antivirus software.
Optional 1Gb
LAN card
16903A
16900A and 16902A
Optional 1Gb
LAN card
10/100BaseT
LAN port
10/100BaseT
LAN port