Installation guide

Using and Updating the Logic Analysis System 6
16900 Series Logic Analysis Systems Installation Guide 115
4 Remove screws from the back of the CPU tray using a Torx T- 10
screwdriver.
5 Remove the CPU tray.
a If you have a 16900A or 16902A, use the tray lever to disconnect the
CPU board from the module interface board then slide the tray out
being careful not to catch the loose cables on anything.
16902B or 16903A
16900A or 16902A
9 screws
7 screws
Tray lever
Post and alignment hole
Connectors
MIB