Installation guide

Using and Updating the Logic Analysis System 6
16900 Series Logic Analysis Systems Installation Guide 113
To install interface cards (16900A, 16902A, 16902B, or 16903A)
The following instructions show you how to properly remove/replace the
CPU tray and install PCI cards.
1 Power down the system and disconnect the power cable before
installing interface cards.
2 Remove the cover.
a Remove 3 screws from the back panel using a T- 10 screwdriver.
b Remove the handle using a T- 15 screwdriver to remove the 2 screws.
c Slide the cover back and up to remove.
CAUTION
Electrostatic discharge can damage electronic components. Use grounded wrist straps
and mats when performing this procedure.
!
CAUTION
When reinstalling the handle assembly, ensure that the screws are torqued to 2.372
Newton meters (21 inch pounds) so that they do not work themselves loose.