User`s guide

Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 1-17
Sweep Measurements
Defining Measurement Conditions
6. DISCHARGE:
Select ON secondary softkey to connect the discharge resistor to VMU input, or
OFF to disconnect the resistor. The discharge resistor is used to prevent the
VMU inputs from charge up in the idle state.
When DISCHARGE is ON, the discharge resistor is automatically connected to
the VMU input, and disconnected from the input in the measurement state.
VNAME and INAME
You can use VNAME and INAME names in user function definitions or for analysis
on the GRAPHICS/LIST screens. These names must be 6 or less alphanumeric
characters. First character must be alphabet character.
To disable a unit
Select DELETE ROW softkey. The settings for the unit are deleted.