User`s guide

Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 8-41
Support Functions
Switching Matrix Control
Step 7. To apply the connection information to the E5250A
Select the APPLY SETUP softkey to apply the setup to the E5250A.
Step 8. To apply the open to all connections to the E5250A
Select the APPLY OPEN ALL softkey to apply the open to all connections on the
E5250A. The setup on the screen will be also changed to open all connections.
Step 9. To cancel the setup changes on the screen
Select the CANCEL SETUP CHANGE softkey to cancel the changes you made on
the screen. The setup on the screen will be changed to the setup prior to the change.
The E5250A connection setup is not changed.
To Use Matrix Setup File
The 4155C/4156C can save/get/copy/purge/rename the matrix setup file
(extension: MAT). To access the matrix setup file, set the 4155C/4156C to the
SYSTEM CONTROLLER, and set the E5250A control mode to ON; then use the
filer function or press the
Save/Get front panel keys.
On the file operation screen, select the MAT secondary softkey in the TYPE field to
specify the matrix setup file. The TYPE must be MAT.