User`s guide
Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 8-37
Support Functions
Switching Matrix Control
To Control Connections
To control the matrix connections, select the E5250A SETUP softkey. The
4155C/4156C sends a query for the present setup of the E5250A, and displays it on
the E5250A CONNECTION SETUP screen.
Step 1. To select the setup display mode
In the SETUP DISPLAY MODE field, select the display mode using the following
softkeys:
ARRAY Sets the array display mode. You can define the matrix
connections by using the softkeys.
LIST Sets the list display mode. You can define the matrix
connections by specifying the output port numbers.
Step 2. To select card number (only for LIST display mode)
When the CONFIG MODE is NORMAL and the SETUP DISPLAY MODE is
LIST, the CARD NUMBER field is displayed. In this field, select the card for which
you are going to set up the connection information on the screen. Use the CARD1,
CARD2, CARD3, or CARD4 softkey to select the card.
B
CHANNELS: E5250A CONNECTION SETUP 01JAN20 04:13PM
S
CHANNEL
DEF
USER
FCTN
USER
VAR
E5250A
PROP
E5250A
SETUP
ARRAY
LIST
ARRAY
Select Setup Display Mode with softkey or rotary knob.
*SETUP DISPLAY MODE
ARRAY
*MATRIX CONNECTION STATUS
INPUT
PORT 111 111111122222 222223333333 333444444444
123456789012 345678901234 567890123456 789012345678
SMU1
SMU2
SMU3
SMU4
SMU5
SMU6
VSU1
VSU2
VMU1
VMU2
. :OPEN
X :CLOSE
BIAS DISABLED
_
:
x:
CLOSE ON BIAS PORT
............
............
............
............
............
xxxxxxxxxxxx
X........... ............ ............
.X.......... ............ ............
..X......... ............ ............
...X........ ............ ............
....X....... ............ ............
.....xxxxxxx xxxxxxxxxxxx xxxxxxxxxxxx