User`s guide

1-4 Agilent 4155C/4156C Users Guide Vol.2, Edition 6
Sweep Measurements
Measurement Functions
Basic Sweep Measurement
Basic sweep measurement uses one sweep source (VAR1).
The following sweep types are available:
•LIN/LOG
Linear staircase
Logarithmic staircase
SWEEP MODE
Single Source channel sweeps the output from user specified start value to
stop value.
Double Source channel sweeps the output from user specified start value to
stop value, then from stop value to start value.
You can select any combination of LIN/LOG and SWEEP MODE as shown in the
following table: