User`s guide

Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 6-13

Analyzing Measurement Results

Manual Analysis

You can position lines, markers, and cursors by using front-panel keys, rotary knob,

and softkeys.

This section covers the following manual analysis tasks:

Marker and cursor: • “To Specify a Measurement Point on Curve” on page 6-14

• “To Specify between Measurement Points on Curve” on page 6-16

• “To Display or Move Cursor” on page 6-18

Display range: • “To Adjust Display Range to Measurement Curve Automatically” on page 6-19

• “To Zoom the Display Range” on page 6-19

• “To Center Display at Cursor Location” on page 6-20

Line: • “To Draw Line through Two Specified Points” on page 6-20

• “To Draw Line through Specified Point with Specified Gradient” on page 6-22

• “To Draw Tangent to Specified Point of Measurement Curve” on page 6-24

• “To Draw Regression Line for Specified Region” on page 6-26

• “To Display and Select a Line” on page 6-28

Another graph

functions:

• “To Display Grid on the Graph” on page 6-28

• “To Change Data Variable on Graph” on page 6-29

• “To Change Range of X or Y Axis Scale” on page 6-30

• “To Change Variable Assigned to X, Y1, or Y2 Axis” on page 6-31

• “To Overlay an Internal Memory Measurement Curve onto Plotting Area” on

page 6-32

Analysis on the

LIST screen:

• “To Scroll the LIST screen” on page 6-34

• “To Display or Move Marker on LIST screen” on page 6-35

• “To Change Variables of LIST screen” on page 6-36