User`s guide
Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 4-25
Quasi-static C-V Measurements
Making a Measurement
Step 7. Execute the measurement
Press the Single front-panel key to execute the measurement. The 4155C/4156C
starts the QSCV measurement.
After the measurement, the measurement results will be as shown in the following
example:
NOTE In the QSCV measurement, the 4155C/4156C executes the capacitance
measurement at the sweep steps except for the sweep start voltage and stop voltage.
This example does not execute the capacitance measurement at 3.1 V and − 3.1 V.
B
GRAPH/LIST: GRAPHICS
S
MARKER/
CURSOR
LINE SCALING DISPLAY
SETUP
QSCV
SETUP
TIMING
SETUP
CONST
SETUP
MARKER
ON
MARKER
MIN/MAX
INTER-
POLATE
OFF
DIRECT
MARKER/
CURSOR
MARKER
SKIP
AUTO
ANALY-
SIS
CURSOR
OFF
MARKER( 2.900 V 108.508pF )
(F)
110.p
C A P01
10.0p
/div
36.0p
-3.00 V1 (V) 500.m /div 3.00