User`s guide

Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 4-21
Quasi-static C-V Measurements
Making a Measurement
4. Set the TIMING table. The following values are just an example.
This table sets the hold time and delay time.
Hold time: 0 to 655.35 seconds, 10 ms resolution.
Delay time: 0 to 65.535 seconds, 100 μs resolution.
HOLD TIME 10 s
DELAY TIME 100 ms
B
MEASURE: QSCV SETUP
S
QSCV
SETUP
MEASURE
SETUP
OUTPUT
SEQ
PREV
PAGE
NEXT
PAGE
SINGLE
DOUBLE
SINGLE
Select SWEEP Mode with softkey or rotary knob.
*VARIABLE VAR1
UNIT SMU1:HR
NAME V1
SWEEP MODE SINGLE
START 3.100 V
STOP -3.100 V *QSCV MEAS VOLTAGE
STEP -100.0mV 80.0mV
NO OF STEP 61
COMPLIANCE 100.00mA
*TIMING
HOLD TIME 10.00 s
DELAY TIME 100.0ms *QSCV CONTINUE AT ANY Status
*CONSTANT
UNIT
NAME
MODE
SOURCE --------- --------- --------- ---------
COMPLIANCE --------- --------- --------- ---------