User`s guide

Agilent 4155C/4156C User’s Guide Vol.2, Edition 6 3-37
Sampling Measurements
Making a Measurement
Step 3. Define the channel assignments
You set the connection information on the CHANNELS: CHANNEL DEFINITION
screen.
1. If the 4155C/4156C has turned off, turn on the 4155C/4156C. And wait until the
self-test is completed.
2. Make sure that CHANNELS: CHANNEL DEFINITION screen appears on the
screen of the 4155C/4156C. If not, press
Chan front-panel key.
3. Move the field pointer to the MEASUREMENT MODE field, then select the
SAMPLING softkey to set the 4155C/4156C to the sampling measurement
mode.
4. Move the field pointer to the CHANNELS table, and set SMU1 and SMU2 as
shown below.
Only the SMU1 and SMU2 are used for this example measurement. Disable
other units by selecting the DELETE ROW softkey.
UNIT VNAME INAME MODE FCTN
SMU1 VB IB COMMON CONST
SMU2 VG IG I CONST
B
CHANNELS: CHANNEL DEFINITION 00DEC07 02:18PM
CHANNEL
DEF
USER
FCTN
USER
VAR
NEXT
PAGE
CHANNEL
ASSIGN
DELETE
ROW
VB
Enter Voltage Name. (max 6 chars.)
*MEASUREMENT MODE
SAMPLING
*CHANNELS
MEASURE STBY
SERIES
UNIT VNAME INAME MODE FCTN
RESISTANCE
SMU1:MP VB IB COMMON CONST 0 ohm
SMU2:MP VG IG I CONST
SMU3:MP
SMU4:MP
SMU5:HP 0 ohm
VSU1 -------
VSU2 -------
VMU1 ------- ----- ----
VMU2 ------- ----- ----
PGU1 -------
PGU2 -------
GNDU ------- ----
ON
DISCHARGE